iSonic P4875II+MVR10 Motorized Ultrasonic Vinyl Record Cleaner, 110V (10-Records)

iSonic P4875II+MVR10, 10-Record Motorized Ultrasonic Vinyl Record Cleaner, 2Gal/7. 5L, 110V. It comes with motorized fixtures designed to hold five or ten 12″ or 10″ vinyl records, spacers to be used to clean 1 to 4 records, one 8-OZ bottles of cleaning solution concentrate, one box of lab grade Kim wipes non-fibrous tissue for drying the records. The motor with reducer rotates at 5RPM. 5 or 10 records can be cleaned at the same time. Flexible with different combinations of records of different sizes. Fixture can be mounted either on the left or right side of the unit depending on whether the operator is right or left handed, and it’s easy to mount and dismount the records in this orientation. Label protectors with O-ring seals protect the label areas while cleaning. The cleaning solution is a concentrate. Use 1 to 2 capfuls for a full tank of water. The ultrasonic cleaner is equipped with 3 industrial grade ultrasonic stack transducers which are twice stronger and more durable compared to wafer transducers used by some manufacturers in their commercial models and 3 ceramic heaters. Each transducer is controlled by an individual PCB for additional power. This unit has unmatched cleaning power. State of art touch sensing controls. Quick set timer with 10, 15, 20, 25, 30 and 5 minutes. Drainage valve makes it easy to discharge water. Hose is supplied. Do not use the heater for vinyl records. Heater with 5 settings: 122-140°F or 40-60°C. Thermometer to show approximate actual temperature ranges. Cooling fan helps for longer operation. Overheat protector prevents the unit being overused which could cause overheating. Quieter than most competitors’ products. Cover holder. This unit is built solidly with very thoughtful designs and high reliability.

Make sure this fits by entering your model number.
Drainage valve makes it easy to discharge water. Hose is supplied
Stainless Steel Tank, Tank Size 13″x9. 4″x4. 1″. Ultrasonic Frequency 35, 000 Hz, 110V 380W, heaters
One 8-OZ bottle of cleaning solution concentrate. One box of Kim wipe non-fibrous wipes for drying the records
3 industrial grade stack transducers with individual control pub for unmatched cleaning power
Timer for new version: 5-8-10-15 minutes individual timer button for easy operation. minutes with reducing button to adjust it to every minute between 1 to 30 minutes.
Memory to recall the last timer setting used
Heater preset at 95F/35C. Thermometer. Drain
Fixture can be either mounted on the left or the right, for right handed or left handed
Flexible with either 12″ or 10″ or mix and match
Spacers are provided so 1-9 records can be cleaned as well